Used Product Ad posted 3 days ago in Other Beverage Dispensing by Kate McAllister
13 taps, Micromatic 1/3 Horsepower unit, Shanks & panel Buyer assumes shipping & crating cost – for bigger equipment we can help facilitate
Used Product Ad posted 4 days ago in Other Beverage Dispensing by Larry Delaney
Taps, regulators, Sanke "D" connectors for approximately 50 taps. Also 8 kegs (1-1/2 bbl, 8-1/6 bbl). Good quality. purchase from a national beer distributor. Cost over $10k 3 years ago. Make offer
Used Product Ad posted 1 week ago in Other Beverage Dispensing by FRAN TOVES
Used Product Ad posted 1 week ago in Other Beverage Dispensing by Robert Hartley
Complete iPourit 40 tap system that was in operation for less than one year. I have videos of all 40 taps pouring up to the point we shut down the system and can provide those to anyone interested. The cooler is disassembled and not palletized at this point. I will consider breaking the system up, so if you don’t want the cooler or Toast system, I will sell the iPourit and Taps as an option. I have the original quotes for the cooler ($19K), iPourit ($70K) and Tap Systems ($36K) – those are the hardware only portions of the quotes. All combined, the package includes the following: 24’ x 8’ Crowntonka walk in cooler, minus the rooftop condenser unit Dual Intelligen Controllers by Heatcraft (230v Single Phase) – see pic for model # Lighting Kit No floor kit 40 tap iPourit System 40 PoE Touchscreens (latest versions) 40 ADA Sensors...
Used Product Ad posted 2 weeks ago in Other Beverage Dispensing by Jeff Griffith
2 - 12 Tap Pass Through Tower 4" round column. Two are available. $200 each plus shipping.
Used Product Ad posted 2 weeks ago in Other Beverage Dispensing by MARK MERICLE
Nice, stainless steel drip tray with backsplash, 2 glass rinsers and knockouts for 22 taps (I have many taps and CO2 distribution items for sale as well) 91" wide x 31" tall $350.00
Used Product Ad posted 2 weeks ago in Other Beverage Dispensing by Gordon Fagras
Pegas CraftTap 2.0 Growler FIller. Bought for a project that did not materialize. We routinely use one in our Xun Kombucha) taproom and it works wonderfully and can efficiently fill a variety of growler sizes preventing waste and providing quick and foam free refills. Provides a professional "sanitary" look to the public and faster and less wastefull than filling from the taps. We went through the unit and broke it down cleaning and checking/lubing all the various seals and fittings. The LED backlight is working and we have installed new hoses to the tower (Drain, CO2, product line). The manifold has been cleaned and the seals checked on each station. Everything is here with this unit that is needed for installation and operation. If you are not familiar with the operation on these it is quite simple once one understands the concept of counter pressure filling. We have created a...
Used Product Ad posted 2 weeks ago in Other Beverage Dispensing by Del Stephens
Micromatic stainless steel wall mount drip trays - qty. 3. Each wall mount unit is for 5 faucets. Glass rinser not included. Shipping costs not included in listed price.
Used Product Ad posted 2 weeks ago in Other Beverage Dispensing by Del Stephens
Perlick 630SS beer faucets. 6 1/8" beer shanks included. These are in great condition with no defects. Shipping costs not included in listed price. $30 each
Used Product Ad posted 2 weeks ago in Other Beverage Dispensing by Thomas Streeter
I have the tap handles and hub hard mounted to the stainless top. You could move it but would have to contend with a 5 inch hole for the lines. I used this in an active brewery and it is great having a 6 ft line, direct draw system. easy to clean, I had routine service check performed two years ago, this has been a solid unit. I have two of them available.
Used Product Ad posted 2 weeks ago in Other Beverage Dispensing by General Management
Two 80” 6 Tap Commercial Kegerators All American Direct Drive Crowler Can Seamer Machine 150 gold crowler cans with lids Draft System: 80” Commercial Back Bar Self‐Contained Refrigeration Unit o 80” (w) x 29” (d) o Heavy Duty Casters o Black with Stainless Steel Top o Front Ventilation Air‐Cooled Tower o (1) 6‐Tap Air‐Cooled Stainless Steel Metro T Tower o (1) 24” x 8” Stainless Steel Drip tray with Drain and Corner Cut Outs o (6) Stainless Steel Beer Faucets o (6) Black Tapered Tap handles o (1) 131 CFM Blower with Mounting Bracket and Hose (7) 1 Product – 1 Pressure Secondary Gas Regulators (1) Primary CO2 Regulator (6) 304 Stainless Steel Sankey “D” Keg Couplers o Includes Beer Nuts, Tail Pieces, and Washers (12) Stainless Steel Angled Wall Brackets o 5/8” Beer Thread (1) 2.5 Gallon Jerrican Internal Waste Container (1) Crowler...
Used Product Ad posted 3 weeks ago in Other Beverage Dispensing by Douglas Crane
Advanced beer gas mixing and dispensing system. Select from one of five gas mixtures and control the supply pressure for each of up to twelve taps. We all know that different beer styles require special attention for the gas mixture and pressure in order to deliver the correct pour. To solve this challenge we constructed a flux "capacitor" which allows the supply mixture to be selected and then the pressure adjusted for each tap. The system is based on a Liberty Beverage gas mixing system (complete with a nitrogen generator, so all you need is a CO2 supply). Reply if you are interested.