New Product Ad posted 4 months ago in Boilers and Heating by Wattco
Screw Plug heaters from WATTCO™ consist of hairpin tubular elements that are brazed or welded into a machined pipe thread fitting, (normally an NPT fitting for North American standards) which are then screwed directly through a threaded coupling in the tank wall or vessel, or installed in pipe. Screw plug heaters are an easy way to heat up solutions in smaller containers that also require controls. Mechanical thermostats or Digital control panels can be used with these immersion heaters to help reach target temperatures with great accuracy meeting your project objectives. Additional thermowells can be installed for high limit temperature probes to help protect your liquid and processes.
Wattco Screw Plug Immersion Heaters
New Product Ad posted 4 months ago in Boilers and Heating by Wattco
Screw Plug Immersion Heaters Screw plug heaters – sometimes referred to as threaded immersion heaters – are constructed of long heating elements in the shape of tubes which are welded into the interior of the heater. The assembly is screwed, plugged, or threaded directly into the system through an opening lined with threadbare – hence the names screw plug heater and threaded immersion heater. This design makes it easy to remove the heater for maintenance or replacement. Screw plug heaters are easy to install and are suitable for a wide range of industrial food manufacturing applications. These heaters are energy efficient and often used for direct heating of chemicals and fluids.
Used Product Ad posted 2 days ago in Boilers and Heating by michael daly
Never used Columbia Boiler. 50 HP 2,250,000 BTU/hr. Was intended for a big brewery expansion with a 30 bbl brew system, but costs got to high and we had to abandon those plans. We received it in august of 2022, and it's just been in storage ever since. Asking 25K.
Used Product Ad posted 2 days ago in Boilers and Heating by Kate McAllister
Measurements: 18in x 26in x 22in (height) Includes steam hose & wand
Used Product Ad posted 4 days ago in Boilers and Heating by Ryan Evenson
This heat exchanger worked great for us for about 3 years on our 7 bbl brew house until we upgraded to a 15 bbl system. It’s a Chinese made system and it worked well for us for several years Buyer responsible for shipping from Hallock, Minnesota.
Used Product Ad posted 4 days ago in Boilers and Heating by Lewis Kubitz
2014 Rite 120S Boiler Have original wiring diagram and shop sheet from Rite. Ready to load. Can ship from Boulder, CO 80301 or Decatur, IL 62521 $12,500 or best offer
Used Product Ad posted 4 days ago in Boilers and Heating by Liam Wurtz
Great condition. Some marring of stainless on floor of the interior. Scaling up to 10 barrel HLT and looking to sell this one. $4500 or best offer Features 1.5” Tri-clamp Base port with butterfly valve 1.5” Tri-clamp inflow Side port Lid with 2” and 1.5” tri-clamp ports 2” side port for heating Element ¾” port and housing for temp probe Watlow BHN717N3W-40 Tubular Plug Heater: 2” 3 Element 240v 9kw Other Information Easy hook-up to thermostat, electric No built in recirculation Approx. 12 hour heat up
Used Product Ad posted 5 days ago in Boilers and Heating by Adam Shay
Raptor Firetube Velocity Propane Fuel Boilers; two available; 399k BTU/Hr. Asking $2500 each. Other equipment is also available.
Used Product Ad posted 1 week ago in Boilers and Heating by Nolan West
Good Condition CPE Systems Heat Exchanger Brewey HX - 5 BBL System Frame Material: Stainless Steel Surface Area: 1.925 M^2 61 x 0.5mm 316ss plates EPDM clip on gaskets Dual pass flow 1 1/2" Water connections 1 1/2" TC Wort connections 18L Frame length Max plates: 60 Open to reasonable offers. Shipping charges added once address is determined.
Used Product Ad posted 2 weeks ago in Boilers and Heating by kevin kurland
15HP Fulton High pressure Nat Gas boiler. MWP 150psi. Disconnected for move but I do have a video of it running. Used a couple of weeks every other month for Still and Mash tank for last 10 years. Works perfect. Moving and need to sell. $5000 OBO
Used Product Ad posted 2 weeks ago in Boilers and Heating by Charles Rick
Used great working tankless water heater, heats using propane but can be converted to natural gas. Provides up to 150,000 BTU. It was used to supply hot water to a 7bbl system, including a tasting room and bathroom hot water needs. Asking $800 or B/O.
Used Product Ad posted 3 weeks ago in Boilers and Heating by James Heinrich
Electric steam boiler, feed water pump and pnuematic condensation return pump. 480 volt 3ph used for 7 years about once a week. Voltage can be changed with new heating elements. I bought it new and am retiring.