Cans

Used Product Ad posted 21 hours ago in Canning Equipment by steve schlegel

Cask canning  line for sale. We purchased  this but haven't  been able to set it. Up do to water and  power supply  at our warehouse.. please no silly low baller  if your just kicking  this around and don't really  want to buy , I understand.  But please don't  waist a bunch  of time. Not to sound a jerk but  I am sure  everyone  understands...if your really  not a buyer  then qhy send a message. Lol thanks. It's all ready for shipping on a skid ready to go! Will load and assist. Asking  $28500.00

Used Product Ad posted 3 days ago in Canning Equipment by Mario Alaniz

recently removed from service from an Austin Texas facility and is now stored in our facility in Edinburg, Texas.  Has slim 202/200 can parts installed and comes with change parts for standard 12oz and 16oz cans, complete manual, and some spare parts.  In-person inspections are welcome.

Used Product Ad posted 5 days ago in Canning Equipment by jon ove

Eurostar 9/1 Can Filler Monoblock Counter Pressure Nitro Doser 50 cans per minute Recent factory tech onsite & refurb of seamers. Codi full height depal available as well. Video Link 1 Video Link 2 Video Link 3 Video Link 4 Reason we're selling is that we are upgrading to a faster filler.    

Used Product Ad posted 5 days ago in Canning Equipment by Eric DeRise

Recently purchased this pre-owned canning machine from another business. This is a Wild Goose Gosling Version 1.0. However, we were not aware that the machine cannot be adapted or retrofitted for any other size of cans. It only operates with 12oz standard cans. We just want to package in other sizes. The machine is in great shape, the original owner ran under 150k seams. They were the only owners and bought it in 2020 direct from the manufacturer. We have not installed the machine in our facility after receiving it from them in December 2024; it’s just been sitting in our warehouse since then. We’ll also include a stainless steel mount to go with it. PRICED TO SELL! Original cost of this machine was over $29k. We’ll cover the freight cost and coordinate the shipment, as long as it’s going to a state in the continental US (not Alaska or...

Used Product Ad posted 6 days ago in Canning Equipment by jags0401

This Twin Monkeys three head Yampa was delivered to us in November 2020. It has been a great machine for us and easily hits 19 cans per minute (16oz cans) with a reasonable gravity beer. We've experienced great product shelf life and minimal O2 intrusion with this machine. This unit includes the flip and rinse module and the rinse/dry tunnel add-ons. There are less than 130,000 seams on this machine, so it's really low miles. The only issue is the flip and rinse belt is starting to show wear and could be replaced, which is very inexpensive. Includes spare parts and various lubricants. I'll also throw in a couple layers of brite 16oz cans and a bunch of ends. The stand in the photo is temporary and not included.

Used Product Ad posted 6 days ago in Canning Equipment by Bryan Hickey

https://www.microcanner.com/MC-ATOMIC.html Used 1 year, excellent results, excellent condition. Comes with SS Table and cleaning pump Lists $23500 new.

Used Product Ad posted 6 days ago in Canning Equipment by Matt Morrow

Codi CCL-45 Counter Pressure Canner (3 head), SKAFAB Microbus Depalletizer, Pack Leader ELF-50 Labeler for Sale, set up for mobile if wanted $115,000 w/o Trailer CODI CCL-45:  Been used for approximately 110,000 cans.  Runs excellent and have canner off brites and kegs with very little to no loss (less than a case per run).  Had it running at 30 CPM under perfect conditions but averages about a case per minute.  Has lid chuck for B-64 cans but that can be changed with a call to CODI.  Has all the bells and whistles possible including the CO2 tunnel from fill heads to seamer and pre-purge.  Never checked DO as I do not have equipment but I know it is extremely low based off our shelf life on the IPA we put through it which was award winning and lasted 4+ months with little degradation.  The whole line can be set up...

Used Product Ad posted 5 days ago in Canning Equipment by Eric Fouch

Lightly used three head canner. Less than two skids of cans processed. It works great, we just don’t use it much. comes with the infeed table.

Used Product Ad posted 1 week ago in Canning Equipment by Mario Bourgeois

Pentair Haffmans CO2 CO2/O2 meter Includes cover, handle, service kit and ISD-SP piercer. (Retails for 20K+). Used a few times weekly between 2021 and 2023. Reason for selling? I closed my brewery in 2023. The equipment was under a lease agreement and what I owed on it was settled through the bankruptcy. The leasing company is not interested in taking it back (go figure!). the price I'm asking is the money I have paid so far. Hell of a deal for a high quality piece of equipment.

Used Product Ad posted 2 weeks ago in Canning Equipment by Lewis Kubitz

ABE LinCan 30 – 7-head canning line in great shape. Recently decommissioned with previously replacement of air lines and the seamer rebuilt. PLC and touch screen are in good working order. Set up to do both 12oz and 16oz. Highlights: – Up to 30 cans per minute (CPM) with upgradeable options. – Well-suited for can packaging at scaling volumes. - 10-Inch Color Touchscreen: Simplifies setup and operations. - Post-Rinse & Dry Station: Keeps cans clean and dry for final packaging. - Electrical: 208 Volts, 60Hz, 3-Phase, 3 wire Will load from Champaign, IL 61822 Dimensions: 200" L x 35" W x 125" H Weight: 1600 lbs Can crate for extra cost

Used Product Ad posted 2 weeks ago in Canning Equipment by Pennington Distilling

Chart Liquid Nitrogen Doser -in use with no known issues -removed from service when canning operations moved offsite -have the original shipping crate available -includes Chart Stand and Can Sensor   Pick up Nashville, Tn, buyer responsible for any shipping or rigging cost Please reach out with any questions, carter@penningtondistillingco.com   Specs from Chart Website  • Discrete Dosing – Craft Custom (750 cpm) • SoftDose™ Compatible – Chart’s proven technology for hot fill, powder and granular applications • Dynamic Dose – Up to 16 containers each with a different dose duration • Reset Timer – Reset each series back to one in case of line stoppage Liquid Nitrogen: 3 – 100 psi (125 psi MAWP / 0.2 Gaseous Nitrogen: 60 – 80 psi (4.1- 5.2 bar) for Purge Electricity: 110 – 240VAC; 50/60Hz, 110W