Cleaning and Sanitization

Reset - Viewing: Used Product Ads, Category Cleaning and Sanitization

Used Product Ad posted 4 days ago in Keg Washers by Eric Addison

Only 1,000 kegs run through it.

Used Product Ad posted 3 weeks ago in Keg Washers by Jeff Tobin

Three station (keg), three tank (caustic, acid, rinse), semi-automatic keg washer/sanitizer. Includes stack light status indicator, sanitizer purge feature. Well maintained, this is a workhorse. Just connect kegs, press the start button, and everything is automated. Return minutes later to remove your cleaned, purged and sanitized kegs.

Used Product Ad posted 2 days ago in Keg Washers by Robert Ryan

NEW (Never Used) Portland Kettle Works 3-Head Keg Washer Brand: Portland Kettle Works Made in the USA Located in Canada Ready to ship – no lead time for manufacture Never used and in storage at a warehouse See below for more information   Keg Washer Details 3-head machine Semi-auto with HMI screen Washer, sanitizer, and CO2 purge Easy-to-use manifold with onboard pump and peristaltic pump NOT included yet required: Requires a reservoir (grant tank) for chemical additions Typically, a portable grant tank (~35 Gallon) is used Sold separately because breweries have multiple options to achieve this requirement We have a PKW hop-back grant available, but it is sold separately Refer to the additional ad/listing for that equipment   Price and Shipping Info Price $14,990 USD REDUCED – NOW $11,990 Payment in equivalent Canadian currency can be negotiated BONUS: Talk to us about bundled pricing for all our available equipment See...

Used Product Ad posted 10 months ago in Keg Washers by Lawson Kegs Inc.

Made in Canada. This semi-automated dual station keg washer plugs directly into a standard electrical outlet for hassle-free thorough cleaning.  14 step cleaning cycle thoroughly cleans kegs, keg sphere, and dip tube.Easy to use, rigorously validated. Lockable casters, detergent reservoir, touch screen operation, etc.

Used Product Ad posted 2 weeks ago in Cleaning and Sanitization by Red Rover

Industrial 56gal ultrasonic cleaner designed to clean with hot caustic, big enough to clean production pipes along with components etc. Purchased for a project that didn't happen cost over $30K new, brand new. https://www.globalindustrial.ca/p/xtra-st2500h-ultrasonic-cleaner-208v-3-ph-dual-freq-25-45-khz-high-power-57-gallons?infoParam.campaignId=T9F Can palletize and load. $9750 or best offer

Used Product Ad posted 4 weeks ago in Keg Washers by William Sada

  Alpha Wash Dog 2 Automated Keg Cleaner $8,900  

Used Product Ad posted 4 weeks ago in Keg Washers by Sean Mcdonald

We have a keg washer. It washes two kegs at once. Has two built in reservoirs for detergent and costic. Has a built in heater and pump. For more info email beer@colestreetbrew.     Com

Used Product Ad posted 22 hours ago in Keg Washers by Morgan Smith

Sankey III Keg Washer/Racker (4 station, 230/3/60) (Stock Code YKEGWSH-3P 4STN) Stainless steel construction c/w glass bead finish Fills one to four kegs simultaneously Cleans one to four kegs simultaneously Stainless steel centrifugal pump Portable on two rigid castors Large solution tank with cover and heater Pump motor starter & switch pre-mounted for easy hook-up Fills 40, cleans 28 kegs per hour. Oil free air at 7 - 15 SCFM @ 40 psi REQUIRED Water at 50 - 70 psi and 40 - 70 GPM REQUIRED Full load amperage 22Amps, 208 Volt, 3-phase, 60Hertz Buyer responsible for any shipping charges.

Used Product Ad posted 2 weeks ago in CIP Systems by jeremiah cooper

Like new CIP System, 150 Liter, 2 tank, heated, UL, 208-240V 3 phase We used it for about two weeks and it has been sitting ever since. Firm on the price and delivery available for a fee within 300 miles. Purchased for $7,500 selling for $5,500.

Used Product Ad posted 7 days ago in Keg Washers by Jason Bell

DME Keg Washer with- Application: cleans & fills kegs Output rate: Fills up to 40 kegs per hour Cleans up to 28 kegs per hour Keg size range- Minimum 20 liters Maximum 50 liters Fully portable Includes supply pump with motor. Stainless steel construction Works well. Ready to ship. 460V for efficient operation.

Used Product Ad posted 7 days ago in Keg Washers by John Murman

Fully portable and compact design allows for easy maneuvering. Cleans and fills 1/2bbl, 1/4bbl and 1/6bbl kegs with sankey couplers. -4 station designed for optimal throughput  -Simultaneously cleans or fills four kegs at once -Heated caustic/pre-rinse tank with low watt density electric heater -Low-level heater protection to prevent burn out -Fully portable -Stainless steel construction -Supports, cleans and fills kegs from 20L – 50L (1/6BBL – 1/2BBL) -Stainless steel supply pump with wash-down duty motor -Compact design for easy maneuverability -Fills up to 40 or cleans up to 28 kegs per hour (4 station) -Pump Manuel, and comes with new pump seals, including ceramic seal. 220-240 single phase. 5KW Used up untill last year and has been on a storage rack for backup. Works perfectly.

Used Product Ad posted 5 days ago in Keg Washers by Ryan Pearson

4 head manual keg washer built by Practical Fusion. $3000 (does not include shipping). We had the manifold modified from the original design to add seperate pumps for each chemical reservoir. The pump for the sanitizer reservoir was not working when the keg washer was taken out of service. The heating element for the caustic reservoir worked when taken out of service, but had been taking longer than usual to reach temp. It would probably need replacement eventually. Pumps are 110v and heating element is 220v. Dimensions are approximately 80"x38"x44"(LxWxH).

To top