Grain Storage and Handling Equipment

Reset - Viewing: Used Product Ads, Category Grain Storage and Handling Equipment

Used Product Ad posted 3 weeks ago in Grain Storage and Handling Equipment by Dustin Teague

Custom Fabricated Mill Roller Grinder for 1-5 BBL System. Hopper is large enough to hold (1)-55 gal. sack of grain. Wood Cabinet below for dust control and storage of milled grain. Can be attached to auger if needed. 1 HP motor. 110v. Comes with 3 sets of back up rollers so you can always have fresh re-knurled rollers to swap out. Rollers were fabricated by https://www.crankandstein.net/ Don Obenauer at crankandstein has been great for the past 7 years keeping our rollers sharp.

Used Product Ad posted 3 weeks ago in Grain Storage and Handling Equipment by Stoney Head

2 Roll grain mill for sale, side by side 14" rollers, hopper on top, grain shoot on bottom, adjustable crush size, access panels for easy cleaning, must have 208/230V 3 phase power supply, 26A.  We purchased this brand new in 2013 and it has been a workhorse for our brewery.  Currently set up for plug in to run but can easily be converted to a wall switch.  New drive belts replaced 2019.  Comes with back up belts.  Weighs roughly a ton (2000 lbs). WE ARE MOTIVATED TO SELL. MAKE US A RESONABLE OFFER! You pay shipping from Reno, Nevada (89511)

Used Product Ad posted 3 months ago in Grain Storage and Handling Equipment by ABM Equipment

Pictures are too big for the site, go here to scroll the gallery (arrows are hard to see). Briefly-used grist case from the distilling industry with air flow-assist configuration. Free of defects with Ø11″ inlet, Ø6″ outlet, and Ø4″ dust port. Click here to view full drawings and dimensions. Go here for general information about our grist cases. Volume 450 Cubic Feet Capacities Liquid – 3,172 Gal | Grain – 11,436 lbs. Materials 304 Stainless with 2B outer finish and sanitary interior finish Dimensions 132 9/16″ H, 110 1/4″ W Weight 1,876 lbs. Made In USA Price $18,000

Used Product Ad posted 4 weeks ago in Grain Storage and Handling Equipment by Jason Hansen

Engl 2 roller mill in good condition. This will be available mid-summer 2024. Local pickup, or buyer arranges shipping.

Used Product Ad posted 3 weeks ago in Grain Storage and Handling Equipment by Adam Rhodes

A pair of leak-proof dump hoppers. Easy to grain out and then dump into waiting farmer truck. With a pair you can store grain for a period before dumping. One is pretty new, one is pretty old but still super functional. Triggers and safeties work on both units. $500 for the pair

Used Product Ad posted 1 day ago in Grain Storage and Handling Equipment by Eric Underwood

Used Malt Mill.  This Mill works as it should.  We replaced it with a larger mill a couple of weeks ago and no longer have a use for it.  Price reduced for quick sale!

Used Product Ad posted 2 weeks ago in Grain Storage and Handling Equipment by Matt Marple

20lb per minute milling.  Explosion proof Moter on rolling cabinet.  Rollers are barely used and replaced right before it was decommissioned.  50lb steel hopper, has a small channel cut into it where we installed a grain shoot.   $3,000 Buyer is responsible for all packaging and shipping costs from Eagle, CO

Used Product Ad posted 2 weeks ago in Grain Storage and Handling Equipment by Nolan West

Great condition Apollo EconoMill 1.5 (Brewery 8GPI) Included: Brewery Package (x-Hop, H-roll, FAB or Funnel boot, X-Legs, Casters) 3ph 230/460v Explosion Proof Motor (upgrade) Open to reasonable offers. Shipping charges added once address is determined.

Used Product Ad posted 3 weeks ago in Grain Storage and Handling Equipment by Scott Denhart

Super sack unloader, low headroom with load cells 6K.  Can load onto a truck.  Buyer responsible for shipping.

Used Product Ad posted 3 weeks ago in Grain Storage and Handling Equipment by Raquette_River

For Sale: Monster grain mill, complete with motor. $350.00. Can be seen at Raquette River Brewing in Tupper Lake.  Cheers!

Used Product Ad posted 1 day ago in Grain Storage and Handling Equipment by Robert Ryan

NEW (Unused) Suspended Grist Case NEW (Unused) Suspended Grist Case (Stainless Steel) Designed for a 5 BBL system with double batching Stainless steel Includes lifting lugs for rigging and suspending above the mash tun Manufactured by YoLong Brewtech Drawings are available   Price and Shipping Info Price $990 USD REDUCED  - NOW $890 USD Payment in equivalent Canadian currency can be negotiated INCO terms EXWORKS (Windsor, Ontario, Canada) Shipping, handling, duties, tariffs, and taxes are not included See INCO terms online The buyer is responsible for the ownership and costs of moving and shipping the equipment =========================== Other Equipment Available Portland Kettle Works 5 BBL Brew House with 15 BBL HLT (steam powered) Portland Kettle Works pressurized hop-back grant (35 Gallon) Portland Kettle Works 3-Head Keg Washer YoLong Stainless Steel Suspended Grist Case for 5 BBL system YoLong Cellar Tanks - NEW (Never Used) Cellar Tanks, 5 BBL and 10...

Used Product Ad posted 6 days ago in Grain Storage and Handling Equipment by DESTIHL BREWERY

For Sale:  12" Pneumatic Knife Gate Valve, rated for 150 psi, crated, in like-new condition. Terms: $300.00.  Already crated and available for immediate shipment. Price is as-is, FOB Normal, IL (i.e., Buyer responsible for freight/shipping).  100% non-refundable down payment via bank wire to secure purchase and prior to loading/shipping. Viewing by appointment only. To schedule an appointment to view or to obtain more information or to otherwise submit an offer, please email only serious inquiries to office@destihl.com (replies to this post on-line will not be routinely checked).

To top