Miscellaneous Equipment

Reset - Viewing: Used Product Ads, Category Miscellaneous Equipment

Used Product Ad posted 2 weeks ago in Miscellaneous Equipment by Pat Rasmus

Brewery & Cidery Equipment Auction. Ashburn VA TCOB of Ashburn VA Has Closed and Will Make a Complete Liquidation Including Fermentation Tanks, Uni Tanks, 500L Braumeister Brew kettle 50L Brew On Site Kettles, Glycol Chiller, Refrigeration System, Bottle Filler and Cleaner, Pumps, 20 Tap Self Pour Draft System, Commercial Kitchen Equipment, Shuffleboard And Pool Tables, Taproom Furniture, Bar Accessories, And Everything Needed to Start Your Own Brewing Business. License 2906000261 Auction link: End Date: July 25, 2024 Contact: Email:  info@rasmus.com Phone: (703) 768-9000 Equipment List: COUNTER PRESSURE FILLER MACDONALD STEEL DFC4 GRAIN MILL ALPHA FERMENTORS DUAL STATION KEG WASHER ALPHA BREWING OPERATIONS CLEAN IN PLACE SYSTEM BLICHMANN ENGINEERING BOILERMAKER HOP DOSER PLATE FILTER CENTRIFUGAL PUMP LENZE AC TECH AUTOCLAVE STERILIZER ALL AMERICAN HEAT EXCHANGER BREW ON SITE KETTLES SPEIDEL FERMENTATION TANKS BREWTECH BRITE TANK 10BBL and 5 BBL UNI TANKS SELF POUR DRAFT SYSTEM G&D CHILLERS GLYCOL CHILLER SYSTEM REVERSE...

Used Product Ad posted 3 weeks ago in Miscellaneous Equipment by Schneider Industries

SIRIUS CIDER CO. Surplus Beer & Cider Processing Equipment BIDDING CLOSES: Wed. July 31 ASSET LOCATION: Pittsgrove, NJ CHATTANOOGA BREWING CO. Assets to Ongoing Operations. BIDDING CLOSES: Wed. Aug. 7 ASSET LOCATION: Chattanooga, TN UNLIMITED WATER BOTTLING EQUIPMENT ALL Bottled Water Manufacturing & Plant Supply Equipment. Plant Closed! BIDDING CLOSES: Thur. Aug. 1 ASSET LOCATION: St. Louis, MO Visit – www.schneiderind.com  or joshb@schneiderind.com Call – 314-863-7711

Used Product Ad posted 3 mins ago in Miscellaneous Equipment by mtnSpirits -

Very lightly used for 1.5 years. basically new!

Used Product Ad posted 22 hours ago in Miscellaneous Equipment by Keith Chapman

60 Gallon Hop Back (with Wheels) - A VERSATILE VESSEL This 60 gallon hop back is designed to be used with a hop bag.  The false bottom is provided to keep your hop bag from getting pulled into the outlet during use.  The false bottom will not keep small hop particles in the kettle. This 60 gallon hop back is ideal for up to 15 bbl brewing system with a 1 pound per barrel hop rate. Purchased in 2019. Lightly used only for about 20 brews with a 10 bbl system. Same tank new is listed at $2,794.  

Used Product Ad posted 3 days ago in Miscellaneous Equipment by Warren Vancuren

Probev can washing system post fill 149 in +52 in + 64 in 600 volt 3 phase 14 in between rails infeed height is 7.5 in also have conveyor with air knife drying system also other conveyors available

Used Product Ad posted 4 days ago in Miscellaneous Equipment by Fermented Sciences

Never used due to change in process (new process had been developed before equipment was finished) Dual 2” in-line carbonating heads for insertion into a product flow stream. The unit is designed to fit into a 2.0” OD 304SS line and will accommodate all styles of carbonated beverages up to 4.0 V/V CO2 in solution at a rate of up to 35 GPM (based upon 1.2 V/V CO2 starting level). The two carbonating heads have 30 feet of 2.0” OD tube line downstream of each carbonating head respectively to allow the CO2 to infuse into the 32 to 34°F product exiting the systems in-line product chiller. One – Twin Head In-line Carbonator with primary centrifugal pump, diaphragm flow adjustment valve at the outlet, two rotameters to monitor CO2 flow to each carbonating head with CO2 needle, check, and isolating valves, in 304 stainless steel. The 12” x 2 micron, 316...

Used Product Ad posted 4 days ago in Miscellaneous Equipment by Chris Anderson

Any brewers out there need clamps gaskets and what not? All of this is stainless steel 34 each 1.5 inch tri clover clamps, 6 each 1.5 inch gaskets, a single 1.5 inch tri clover butterfly valve with plastic handle, a single 1.5 inch tri clover sample cock, 3 foot hose 1.5 inch with TC factory ends 10 each 2 inch triclover clamps, 2 each 3/4 inch valves, 2 each 3/4 inch couplers and 4 inch nipple, a street elbow. 4 each 1/2 inch ball valves, 2 each 1/4 inch ball valves with nipples and a t on both, 2 each 1/2 inch t’s, 4 each 1/2 inch nipples and 1/2 inch elbow. inch stainless steel thermometer, various sized 1.5 ferrules 4 each are female threaded 1/2 inch, one each 3/4 male and female, one 3/8 hose fitting, and the other is 1/2 inch od, there is one spigot valve usually...

Used Product Ad posted 5 days ago in Miscellaneous Equipment by Robb Watson

Generates beverage grade nitrogen safely and efficiently from the air. Never run out of mixed gas again 99.8% + beverage grade nitrogen Eliminates over and under carbonation of beer which reduces waste Cut out the middleman – no more scheduling and deliveries Improve operating efficiency and employee safety Simple installation – light weight tank, wall and floor mount options Dual-bed, PSA (Pressure Swing Adsorption) technology Equipped with the patented BlastOff™ – Gas Leak Detection System 14 SCFH Nitrogen production Max pints/min: 40 Wall or tank mount options BlastOff Leak Detection System

Used Product Ad posted 5 days ago in Miscellaneous Equipment by Robb Watson

Century System Power Pak, air-cooled, 1/3 HP, (1) 100 gph circulating pump, 120v/60/1-ph, 14.4 amps, 1.75 gallon capacity glycol bath, constant pressure expansion valve, adjustable electronic temperature control with digital readout, stainless steel cabinet, 24-1/4"W x 17-1/4"D x 25-1/2"H, R134a, cULus, NSF Option of 1/3 HP at 120V Digital display provides temperature readout and allows for temperature adjustments Superior cooling technology on long runs with high efficiency, compact heat exchanger and 100 gallon per hour glycol pump Top-mounted, close-coupled pump and 1/3 HP ball bearing motor assembly is easily serviceable Factory pre-mixed glycol guarantees superior cooling performance Highly efficient with 1.75 gallon glycol bath Power Pak stand and legs available for off-the-floor mounting Designed to pair with BeerBlast BP-07KPH - see listing

Used Product Ad posted 1 week ago in Miscellaneous Equipment by Chris Anderson

Any brewers out there need clamps gaskets and what not? All of this is stainless steel 34 each 1.5 inch tri clover clamps, 6 each 1.5 inch gaskets, a single 1.5 inch tri clover butterfly valve with plastic handle, a single 1.5 inch tri clover sample cock, 3 foot hose 1.5 inch with TC factory ends 10 each 2 inch triclover clamps, 2 each 3/4 inch valves, 2 each 3/4 inch couplers and 4 inch nipple, a street elbow. 4 each 1/2 inch ball valves, 2 each 1/4 inch ball valves with nipples and a t on both, 2 each 1/2 inch t’s, 4 each 1/2 inch nipples and 1/2 inch elbow. inch stainless steel thermometer, various sized 1.5 ferrules 4 each are female threaded 1/2 inch, one each 3/4 male and female, one 3/8 hose fitting, and the other is 1/2 inch od, there is one spigot valve usually...

Used Product Ad posted 1 week ago in Miscellaneous Equipment by Chris Anderson

150.00 bucks I need this gear gone. 10 gallon cooler with ball valve installed with a boil in bag, 5 gallon stainless steel boil kettle also with ball valve, propane burner, 2 hydrometers, one chugger pump, pass through chiller, Blichman hop rocket,Blichman boil kettle hopping screen, 20 gallon co2 and two 2 gauge regulators, a small oxygen tank, 2 cappers, caps, joy of homebrewing book, two scrubbers, thermometers, scale, magnetic stir plate and bars, scoops and stir spoons, two bottle washers. Well over a grand worth of gear a steal imo at $150.00 HMU.

Used Product Ad posted 1 week ago in Miscellaneous Equipment by FRAN TOVES

Anton Paar Beer Alcolyzer for sale. $25k. Email for photos.    

To top