Pumps, Hoses, Clamps

Used Product Ad posted 2 weeks ago in Pumps, Hoses, Clamps by Cole Chapman

Selling our two diaphragm pumps that are no longer needed. They have both been in use for about 3 years and are in good working order. They have been supplied compressed air with a refrigerated dryer and filters to ensure clean air was used at all times.   The smaller pump is a 12 gallon per minute polyurethane Versamatic pump, and the larger pump is a 35 gallon per minute aluminum Versamatic pump. Both were purchased from TCW Equipment, the 12 gallon link is below. The 35 gallon pump is no longer sold, but a similar pump is linked below.   Both are available for in-person pickup in Colorado Springs.   $100 - 12 GPM Versamatic Polyurethane pump $150 - 35 GPM Versamatic Aluminum pump     https://www.tcwequipment.com/products/simpleair-polypropylene-air-diaphragm-pumps?taxon_id=51 https://www.tcwequipment.com/products/simplespirits-air-diaphragm-pump?taxon_id=51

Used Product Ad posted 4 weeks ago in Pumps, Hoses, Clamps by mtnSpirits -

Barely used. Has mounting plate for VFD. Really nice pneumatic wheels and balances well with heavy pump etc.

Used Product Ad posted 5 days ago in Pumps, Hoses, Clamps by David Walsh

Two Used, Good Condition Diaphragm Pumps. Sold as is. Max Air pressure: 100 psi. Liquid temperature: 32° - 140°F

Used Product Ad posted 3 weeks ago in Pumps, Hoses, Clamps by DAVID MCLAIN

3) TopLine Top-Flo Variable Drive Centrifugal Pumps TF-C114 1.5" inlet + discharge Excellent condition and just changed gaskets in all 3 pumps.  Variable speed to control flow.  230V.  Selling for $799.99 each or $2,099.99 for all 3. C-Series Top-Flo Pumps Sanitary finish / SS 316L construction fully traceable / Easy to install, clean & operate Standard Mechanical Seal: Carbon / Standard Elastomers: Viton Suitable for CIP installations Ready to ship week of 9/23

Used Product Ad posted 5 days ago in Pumps, Hoses, Clamps by David Walsh

Used, good condition water pressure booster. Sold as is.

Used Product Ad posted 11 months ago in Pumps, Hoses, Clamps by Sound Brewing Systems

2hp AMPCO pump and stainless Baldor motor. Currently setup for 110v on a variable frequency drive. Can be switched to 220v. $2000 includes new backplate and seal kit to be sure of perfect operation. Great condition pump cart with pneumatic tires for going off-road. Please contact trevor@soundbrew.com or 530-262-3736 for more info Cheers!

Used Product Ad posted 5 days ago in Pumps, Hoses, Clamps by Joshua Martinez

I have two CPE transfer pumps. One from 2017 the other from 2022. both 2hp 240/208v 3 phase power. Trying to get 1500 for the older one and 2000 for the newer one OBO  

Used Product Ad posted 2 weeks ago in Pumps, Hoses, Clamps by Bob Vokac

Brewmation 1/2 HP Variable Speed Cart Pump. Never used (a little dirty from sitting around the brewery for a year) 3 phase induction motor, Optidrive E3 Variable Frequency drive. look at Brewmation product page for more info: https://www.brewmation.com/product/1-2-hp-cart-pump looking for $2.5k OBO.

Used Product Ad posted 1 day ago in Pumps, Hoses, Clamps by Josie Mielke

Never used Yamada 1.5" FDA AODD pump with 2" sanitary clam fittings.  Inlet/Outlet, 316ss construction passivated satin finish, PTFE coated air motor, and FDA compliant EPDM diaphragms, with teflon balls and 0-rings Air accessory kit for NDP40/40/80 pumps.  Includes a combination filter regulator with gauge, 1/2" X 5' air connecting hose and 1/2" air coupler and air plug. Repair kit for pump.  Yamada liquid end kit for 1.5" FDA pump model NDP-40BSE_FDA.  FDA EPDM diaphragms, teflon balls and o-rings. Air end kit - 40/50 YAMADA PUMP Buyer pays shipping

Used Product Ad posted 3 weeks ago in Pumps, Hoses, Clamps by Thomas Caldwell

3 hp mobile scavenge pump. The unit is 3 phase and has never been used. Purchased as a package with the brewery. Buyer pays for shipping out of state, I will deliver within Colorado